search

Silvercrest SKAS 1000 A16 Dokumentacja Strona 40

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 192
  • Spis treści
  • BOOKMARKI
    • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 39
Section 2
Fault Code Diagnostics
31
40 28 Open circuit at the output stage to the
low range solenoid (Y8)
When submitting a warranty claim under standard
warranty conditions, the complete TCU should be
replaced and the entire unit submitted with warranty
claim.
Out-of-warranty only and/or no warranty claim
submitted, replace lower part of TCU.
Contact OnTrac at 866-668-7221 and request a
ZF-FreedomLine transmission specialist.
41 29 Open circuit at the output stage to the
high range solenoid (Y9)
When submitting a warranty claim under standard
warranty conditions, the complete TCU should be
replaced and the entire unit submitted with warranty
claim.
Out-of-warranty only and/or no warranty claim
submitted, replace lower part of TCU.
Contact OnTrac at 866-668-7221 and request a
ZF-FreedomLine transmission specialist.
42 2A Open circuit at the output stage to the
main solenoid (Y1)
When submitting a warranty claim under standard
warranty conditions, the complete TCU should be
replaced and the entire unit submitted with warranty
claim.
Out-of-warranty only and/or no warranty claim
submitted, replace lower part of TCU.
Contact OnTrac at 866-668-7221 and request a
ZF-FreedomLine transmission specialist.
49 31 Open circuit at the output stage to the
inertia brake solenoid (Y1)
When submitting a warranty claim under standard
warranty conditions, the complete TCU should be
replaced and the entire unit submitted with warranty
claim.
Out-of-warranty only and/or no warranty claim
submitted, replace lower part of TCU.
Contact OnTrac at 866-668-7221 and request a
ZF-FreedomLine transmission specialist.
50 32 Open circuit at output stage to small
disengagement clutch valve
Additional fault codes 51/52/53 also active, verify
connection of clutch actuator connector to TCU. Measure
the resistance between pin 9 and pin 16 of clutch
actuator connector.
Nominal value should be 14-16 ohms.
If resistance is < 14 ohms, exchange clutch actuator.
If resistance is within correct range, exchange upper part
of TCU.
51 33 Open circuit at output stage to small
engagement clutch valve
Additional fault codes 51/52/53 also active, verify
connection of clutch actuator connector to TCU. Measure
the resistance between pin 7 and pin 16 of clutch
actuator connector.
Nominal value should be 14-16 ohms.
If resistance is < 14 ohms, exchange clutch actuator.
If resistance is within correct range, exchange upper part
of TCU.
ISO Fault Code Diagnostics
NOTE: ISO display codes may not be available on vehicles built prior to January 2006.
ISO Fault
Identifier
ISO Display
Fault Codes
(J587 Display) Fault Description
Repair Instructions
NOTE: The following repair instructions pertain to
active faults only. For information and instructions
about inactive faults, please contact OnTrac at
866-668-7221 and request a transmission
specialist.
Przeglądanie stron 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 191 192

Komentarze do niniejszej Instrukcji

Brak uwag
Powiązane produkty i podręczniki dla Ekspresy do kawy Silvercrest SKAS 1000 A16
Ekspresy do kawy Silvercrest SEM 1100 A2 Instrukcja Użytkownika   (70 strony)
  • Rockinger Premium Compatibles Triton Tools Merit DanVex
  • Tek Republic Koncentratory interfejsów Casio Zegarki sportowe Jamo Sprzęt muzyczny Bosch Wykrywacze dymu Dish Cyfrowe rejestratory wideo (DVR)
  • YORKVILLE PX1700 Electrolux ESL8520RO Philips HP3631/01 Samsung SM-T231 LG GR-S462QLC
  • Dell PowerEdge M710 Instrukcja Użytkownika Pioneer N-50 Instrukcja Użytkownika Rigol DM3051 Dokumentacja Huawei HUAWEI MediaPad M3 Lite 10 Instrukcja Użytkownika DeWalt D28715 Instrukcja Użytkowania i Eksploatacji